How To Install Rock Wall Panels

If you're looking to add a little bit of rustic charm to your home, consider installing rock wall panels. These decorative panels are made from large chunks of natural stone and can be installed in just a few hours. Continue reading to know more about rock barrier panels.

Here's how to get started: 

1. Decide on the size and shape of your panels. You'll need enough panels to cover the width and height of your desired area, plus an extra few inches on each side for trimming. 

rock wall panels

Image Source: Google

2. Gather all the necessary materials. You'll need a couple of pieces of sturdy wood for support, a hammer and chisel, a drill, screws and nails, and rock salt or mortar (if using traditional stone). 

3. Cut your wood into the correct dimensions and shape. Make sure the panels are at least 72 inches wide by 24 inches high by 1 inch thick (or bigger if you want them to be really tall). Then use the hammer and chisel to carve out the rough shapes of the panels. 

4. Drill holes in the sides of each panel using the drill. Then screw them together using the screws and nails. Be sure to pre-drill these holes so that the screws go in easily. 

5 . Place your desired stone on top of the walls. Then just pound the rock salt or mortar into place (this should be done in a well-ventilated area because it can cause serious lung problems).